Structured data cabling
Cable runs from a central rack to each outlet, terminated on patch panels and labelled at both ends so faults can be traced later.
Networks and cabling
Networking & Structured Cabling in Islamabad & Rawalpindi
The network is what CCTV, access control, attendance terminals and IP telephony all depend on, so we build it to be extended and diagnosed rather than only to work on the day. That means labelled cabling, tidy racks, switches with capacity to spare, and Wi-Fi that actually reaches the far end of the building.
What we install
Fiber links
Fiber between buildings, floors or distant blocks where copper distance limits or electrical noise make it the right choice.
Network and PoE switches
Switches sized for the device count with headroom, and PoE where cameras, access points and door controllers take power over the same cable.
Racks and cable management
Wall and floor racks, patch panels, dressed cabling and labelling, so the next person to work on it can see what connects where.
Wi-Fi coverage
Access points positioned for real coverage across the building rather than a single router expected to cover everything.
Office network setup
Router, switching, addressing and wireless configured together so devices, printers and shared resources work reliably.
How a cabling installation runs
- 1
Survey
We agree outlet positions, the rack location, cable routes and the power available at the rack.
- 2
Design and quotation
A written quotation covering cable, outlets, patch panels, switches, rack, containment and the labour to install it.
- 3
Containment and cabling
Trunking, tray or conduit installed, then cable pulled, avoiding routes that will cause interference or make later access impossible.
- 4
Termination and labelling
Outlets and patch panels terminated and every run labelled at both ends.
- 5
Testing and handover
Links tested, switches configured and the rack documented so future work does not start with guesswork.
Properties we work in
- Offices
- Multi-floor buildings
- Warehouses
- Retail stores
- Schools
- Clinics
- Factories
- Commercial properties
Equipment and brands
Switching and network hardware are selected to suit the site and the devices connecting to it.
- Hikvision
- Dahua
- Uniview (UNV)
Brand names and trademarks are the property of their respective owners. Their appearance here indicates equipment we supply, install and service — not an endorsement, partnership or distribution agreement.
Maintenance and repair
We also take on existing networks — tracing unlabelled cabling, tidying and re-terminating racks, replacing failing switches and resolving Wi-Fi coverage complaints.
What affects the quotation
We do not publish prices, because the same job varies widely between sites. A written quotation follows a survey, and these are the factors that move the figure.
- The size and layout of the property, and how far each device sits from the equipment position.
- Cable routes — surface trunking, existing conduit, or chasing through finished walls.
- Equipment selection: brand, specification and how much capacity you want to leave spare.
- Whether existing cabling, power or equipment can be reused.
- Access requirements such as height, scaffolding or working outside business hours.
Where we work
We are based at Rafay Mall, Main GT Road, Rawalpindi, Pakistan and carry out networking & cabling work across Rawalpindi and Islamabad. See areas we serve for more detail, or contact us to arrange a site survey.
Frequently asked questions
What is structured cabling?
Structured cabling is a planned cabling system where every outlet runs back to a central rack and patch panel, and every run is labelled at both ends. The alternative — cable added ad hoc as devices are needed — works until something breaks, at which point nobody can tell which cable serves what. Structured cabling costs a little more to install and much less to live with.
What is PoE and why does it matter for CCTV?
Power over Ethernet delivers electrical power and network data down the same cable. For CCTV and access control it means no separate power supply at each camera or door, so there is one cable to run, one to fault-find, and a central point where devices can be power-cycled.
Can you improve Wi-Fi that does not reach the whole building?
Usually yes. Most coverage complaints come from one router being asked to cover a building it cannot reach through, especially with concrete walls. The fix is normally cabled access points positioned around the building rather than a more powerful single device.
Do I need fiber?
Only where copper is unsuitable — typically runs beyond copper distance limits, links between separate buildings, or routes with heavy electrical interference. Within a normal floor, copper is usually the appropriate and more economical choice.
Can the same cabling carry CCTV, telephones and computers?
Yes. A properly designed structured cabling system carries data, IP telephony, IP cameras and access control devices over the same standard outlets, which is why it is worth installing before the individual systems rather than after.
Related services
CCTV Installation
We design, supply, install and configure CCTV systems for homes, offices, shops, warehouses and commercial buildings across Islamabad and Rawalpindi.
PABX Systems
We supply, install, program, extend and repair office telephone exchange systems, including Panasonic hybrid systems.
Access Control
We install door access control so that only the right people open a given door, and so there is a record of who went where.