Sliding gate operators
Rack-driven motors for gates that run along the boundary, suited to driveways where there is no room for a gate to swing.
Automatic gates
Gate Automation Installation in Islamabad & Rawalpindi
We automate sliding and swing gates for homes, compounds, offices and yards, and we fit the safety devices as part of the installation rather than as an optional extra. That covers new automation on an existing gate, replacing a failed operator, and servicing gates that have become unreliable.
Gate automation equipment
Swing gate operators
Arm or ram operators for single and double swing gates, selected for the leaf weight, width and the pillar arrangement.
Remote controls
Handsets for regular users, with additional units added and lost handsets removed from the receiver.
Keypads and readers
Code or card entry for visitors, staff and deliveries where handing out handsets is impractical.
Safety photocells
Beams across the opening that stop or reverse the gate when something is in its path. These are a safety requirement, not an accessory.
Manual release
A key-operated release so the gate can be opened by hand during a power cut or a fault.
How a gate automation installation runs
- 1
Gate survey
We check the gate type, weight, condition, how freely it moves, the pillar arrangement and the power available at the gate.
- 2
Quotation
A written quotation covering the operator, safety devices, control equipment, cabling and any groundwork.
- 3
Preparation
Foundations or mounting prepared, and cabling run to the operator, photocells and control point.
- 4
Motor installation
The operator fitted and aligned, with travel limits and force settings adjusted for the gate.
- 5
Safety setup and testing
Photocells aligned and tested, obstruction behaviour verified, and manual release demonstrated.
- 6
Handover
Remote controls and keypad codes issued, and you are shown manual release and basic checks.
Suitable for
- Villas and houses
- Gated compounds
- Office premises
- Warehouses and yards
- Factories
- Apartment building entrances
Maintenance and repair
We service and repair existing automatic gates — operators that have become slow or noisy, gates that stop halfway, failed remote receivers, misaligned photocells and damaged manual release mechanisms.
What affects the quotation
We do not publish prices, because the same job varies widely between sites. A written quotation follows a survey, and these are the factors that move the figure.
- The size and layout of the property, and how far each device sits from the equipment position.
- Cable routes — surface trunking, existing conduit, or chasing through finished walls.
- Equipment selection: brand, specification and how much capacity you want to leave spare.
- Whether existing cabling, power or equipment can be reused.
- Access requirements such as height, scaffolding or working outside business hours.
Where we work
We are based at Rafay Mall, Main GT Road, Rawalpindi, Pakistan and carry out gate automation work across Rawalpindi and Islamabad. See areas we serve for more detail, or contact us to arrange a site survey.
Frequently asked questions
What is included in a gate-automation installation?
A complete installation covers the operator sized for your gate, safety photocells across the opening, a control panel, cabling and power to the gate, remote controls and a manual release for power cuts. Setting the travel limits and force, aligning and testing the photocells, and demonstrating manual release are part of the job — an automatic gate without working safety devices is not finished.
Can an existing gate be automated?
Often yes, provided the gate is structurally sound and moves freely by hand. A gate that binds, drags or has worn hinges and rollers should be repaired first — automation makes an already stiff gate fail sooner, not later.
What happens during a power cut?
Every installation includes a manual release, normally key-operated, so the gate can be moved by hand. Where a gate must keep working through outages, a battery backup can be specified.
Are safety sensors really necessary?
Yes. An automatic gate moves a heavy object through a space people and vehicles use. Photocells stop or reverse it when the path is blocked, and they are the difference between a gate that is merely convenient and one that is safe around children and vehicles.
Can the gate be opened from an intercom?
Yes. Gate operators are commonly triggered from a video intercom so you can see a caller and let them in without going out — see video intercom installation.
Related services
Video Intercom
We install video and audio intercom systems so you can see and speak to a visitor before opening the door, and release the gate or door without walking to it.
CCTV Installation
We design, supply, install and configure CCTV systems for homes, offices, shops, warehouses and commercial buildings across Islamabad and Rawalpindi.
Access Control
We install door access control so that only the right people open a given door, and so there is a record of who went where.